P3-15

shape
shape

P3-15

The P3-15 offers the sonic and performance advantages of a three-way loudspeaker in a cabinet the size of most two-ways. The CoEntrant CDT3 mid-high driver allows the use of a single, optimally sized Complex Conic horn. Not only does this insure consistent directivity through crossover, but also allows the horn to be ideally sized for consistent directivity through the low-mid crossover as well. Only Renkus-Heinz can combine this level of performance, fidelity and power in such a compact, easy to install or transport, loudspeaker.

DOWNLOADS
PRODUCTS IN THE SERIES

Specification

Technical Data
Frequency Response: P3-15-RN
P3-15-RD		 65 Hz. to 20 kHz. (-3 dB)

50 Hz to 20 kHz (-10 dB)
Sensitivity: P3-15-RN
P3-15-RD		 1.4 volt for rated output, analog
Maximum Peak SPL: P3-15-RN
P3-15-RD		 128 dB-SPL (Peak, whole-space)
Dispersion: P3-15-RN
P3-15-RD		 60 h x 40 v (Optional 90 h x 40 v)
Crossover Frequency: P3-15-RN
P3-15-RD		 480 Hz & 2.5 kHz active electronic
Enclosure: P3-15-RN
P3-15-RD		 3/4 in./19 mm Lite Ply plywood
Grille: P3-15-RN
P3-15-RD		 16 GA powder coated, plated steel
Finish: P3-15-RN
P3-15-RD		 Black (RAL9010) or White (RAL9011) paint, standard. Custom colors optional.
Weight: P3-15-RN
P3-15-RD		 69 lbs/31.2 kg
Dimensions: P3-15-RN
P3-15-RD		 7-1/2″ w x 28-1/2″ h x 18-7/8″ d
445 mm w x 724 mm h x 479 mm d

SA2000 Amplifier Specifications
Audio Connections: P3-15-RN 2 x XLR-3, In & Loop-out, Analog and AES
P3-15-RD 2 x XLR-3, In & Loop-out, Analog and AES
2 x RJ45 Dante Primary & Secondary Etherne
Network Connections: P3-15-RN 2 x RJ45, Looping Ethernet/RHAON
P3-15-RD 2 x RJ45 Dante Primary & Secondary Ethernet/RHAON (Note: Dante and RHAON share a single or redundant Ethernet network.)
Max Input Level: P3-15-RN
P3-15-RD		 +22 dBu, Analog, 0 dBFS digital
User DSP: P3-15-RN
P3-15-RD		 Eight fully parametric filters, high and low shelf, high and low pass filters, delay to 340 ms.
Software: P3-15-RN
P3-15-RD		 RHAON II
Latency: P3-15-RN 6.25 ms
P3-15-RD 6.25 ms Analog & AES
6.25 ms + Dante transport latency
Power Output: P3-15-RN
P3-15-RD		 LF= 1000 watts, @ 8 ohms / MF = 500 watts @ 4 ohms, HF = 250 watts @ 8 ohms. Multi-band peak and thermal limiting on all channels protects the drivers.
Mains Voltage: P3-15-RN
P3-15-RD		 100-240 volts, 50/60 Hz auto-switching
Power Consumption: P3-15-RN
P3-15-RD		 Idle: 400 mW. 1/8 power: 480 W (onset of limiting) 1/3 power: 1100 W (hard limiting)
Power Connector: P3-15-RN
P3-15-RD		 Neutrik powerCON TRUE-1
Temperature Limits: P3-15-RN
P3-15-RD		 Max.: 140º F/60º C, with no direct sun exposure; Min.: -22º F/-30º C; leave unit on to keep interior warm below 32º F/0º C.