FN 15® TAC3
Available for commercial and law enforcement.
MSRP: $1,889.00
Specs
With all new configurations, finishes and features, the FN 15 TAC3 carbine gives you everything you need in an AR-style rifle from top to bottom, made to FN’s exacting standards. Built from a MIL-SPEC foundation with HP/MPI-tested and certified bolt and M16-style bolt carrier group with mid-length gas system and H buffer, the TAC3 performs reliably. Superior accuracy and performance come from the company’s signature chrome-lined, cold hammer-forged barrel made from FN proprietary steel, fully free-floated within a Hodge Defense-designed wedge lock handguard. The rigid handguard, affixed with a proprietary barrel nut and anti-rotation technology, provides continuous 12 o’clock rail space and multiple M-LOK attachment points for lights, lasers and other accessories while minimizing deflection during hard use. Outfitted with ambidextrous charging handle and selector, and FN’s custom 6-position buttstock, pistol grip and magazine, the FN 15 TAC3 is a streamlined, rugged carbine ready for any situation.
FN 15® TAC3 Product Sell Sheet
| PRODUCT# | DESIGNATION | UPC |
|---|---|---|
| 36-100632 | FN 15 TAC3 CARBINE BLACK | 845737013721 |
| 36-100642 | FN15 TAC3 CARBINE FDE | 845737013738 |
| 36-100652 | FN15 TAC3 CARBINE GRAY | 845737013745 |
| Shop FN 15 Accessories | ||
Specs
- Caliber: 5.56x45mm
- Operation: Direct impingement
- Mag Capacity: 30 Rd.
- Weight: 7 lb.
- Barrel Length: 16"
- Overall Length: 33" - 36.2"
PRIMARY FEATURES
FN Handguard with Hodge Defense-designed wedge-lock technology and proprietary barrel nut for an extremely rigid setup that allows for a fully free-floated barrel.
16-inch government profile, chrome-lined, cold hammer-forged barrel made from FN’s proprietary steel.
M16-style MIL-SPEC bolt carrier group and HPT/MPI-tested bolt made from Carpenter 158
Mid-length gas system with H buffer and pinned gas block
RECEIVER
MIL-SPEC forged aluminum receiver in either black anodize or factory Cerakote finish (FDE or Gray)
Mid-length gas system with H buffer and pinned gas block
M16-style bolt carrier group made from 8620 steel
HPT/MPI-tested and certified bolt made from Carpenter 158
Gas keys properly sealed, torqued and staked according to MIL-SPEC
BARREL
16-inch government profile chrome-lined and cold hammer-forged barrel with 1:7 twist
FN Proprietary CMV barrel steel, DIN Spec 21CrMoV5-11
High Pressure tested, MPI after proof firing
A2-style muzzle device
Fully free-floated
HANDGUARD
Extremely rigid 14 5/8-in Hodge Defense-designed wedge lock handguard composed of 6061 aluminum with proprietary barrel nut and anti-rotation technology resulting in minimal deflection
Continuous Picatinny rail at 12 o’clock position
Multiple M-LOK slots at 3, 6, 9 o’clock positions for lights, lasers and other accessories.
FURNITURE
Custom FN 6-position, snag-free buttstock with rubber butt pad and integrated QD attachment point
Ergonomic FN pistol at 19.5-degree grip angle and aggressive texturing for secure grip
TRIGGER
MIL-SPEC trigger
OPERATING CONTROLS
Fully ambidextrous Radian Raptor-LT charging handle
Fully ambidextrous Radian Talon long and short modular safety selector that are reversible with precision machined dovetail interface with spring-loaded retention stud to lock lever in place.
MIL-SPEC-style magazine and bolt release
MAGAZINE
30-round FN polymer magazine