79.95 CA$ Free Shipping (up to 600 lbs).

Reduce slip and fall risks inside & out.

Now you can add more foot traction and safety to all kinds of slippery surfaces indoors and out with TracSafe® Anti-Slip Sealer by Daich Coatings. It’s a unique pre-mixed formula that’s ready to apply wherever you need it. TracSafe® locks firmly onto all kinds of flooring materials, indoors and out. From concrete, patio stones and pavers, to slippery fieldstone, linoleum and even ceramic tile, you can make numerous slippery surfaces safer in just a day.
Treat slippery steps, walkways and wet pool decks, to garage and workshop floors, entrances, shower floors and more. It’s also great for business settings, including exterior grounds, steps, entrances and slippery interior floors.

Product Innovations Grand PrizeAlong with its anti-slip benefit, TracSafe® is also a superior high performance sealer. It forms a tough, clear barrier that protects surfaces and helps keep them in ideal condition. It’s also an excellent top coat for use over all Daich decorative stone floor coatings and other prepared pre-painted surfaces. Just roll on two coats for a lasting, color-enhancing satin sheen and added foot traction that helps protect family, friends and customers

Also available at these Retailers:

Features and Benefits

Where to Use...

Just roll it on!

One gallon covers up to 450 sqft per coat.

Roll on two coats​

Let dry for 6 – 8 hours between coats

DC-2022-MVP-Award-Flooring-TracSafe-Colo

TracSafe® Slip-Resistance Where You Want It.

Frequently Asked Questions

What is the main benefit of TracSafe® Anti-Slip Sealer?

TracSafe® Anti-Slip Sealer is an easy and excellent choice for helping you bring added foot traction to almost any surface. It is a fast and simple solution that you can apply with just a roller.

Is TracSafe® only good for adding slip-resistance? Is it also a GOOD SEALER??

YES, TracSafe is a high performance clear sealer that performs double duty. It renews and effectively protects existing surfaces — ALONG WITH ADDING SLIP RESISTANCE. TracSafe’s clear satin sheen formula means you don’t have to worry about color choice headaches. It’s a crystal clear coating you can apply in a day to numerous surfaces.

What kinds of surfaces will TracSafe bond to?

TracSafe bonds firmly to a wide variety of existing surfaces. It bonds to smooth synthetic surfaces like linoleum and ceramic tile, to pre-painted wood and concrete floors and decks, bare pressure-treated decking — plus concrete, pavers and stone.

As a result, TracSafe is a simple safety-enhancing solution you can use almost anywhere to help protect family, friends and customers.

Can I use this indoors and out?

Yes! Use TracSafe on potentially slippery interior floors subject to moisture and humidity, like laundry rooms, bathrooms, pool decks, garage floors, mudrooms and entrance floors.

For exterior surfaces, TracSafe is a good choice as well. It’s a great safety enhancer for everything from porches and steps, decks, ramps, walkways, patios and pool decks — to exterior commercial grounds, play areas, store entrances, valet parking areas — anywhere that some added safety is desired.

Can I use TracSafe® on a shower floor?

Yes you can! Just be sure that the tile and grout are clean and dry and free of soap scum and soap residue. Then just apply two OR THREE coats of TracSafe. Since the shower area is in an enclosed area with less air flow, allow 6 – 8 hours between coats for thorough drying. If possible, use a fan to increase air flow and speed drying. (Do not direct the fan directly at the wet coating.) After the final coat of TracSafe is applied, let the coating cure for a full 24 hours before resuming use.

Is it true that I can use TracSafe® on ceramic tile?

Yes, TracSafe adheres well to most clean uncoated ceramic tile surfaces. Where good adhesion is achieved, TracSafe can provide additional traction and safety on wet bathroom floors, shower areas, etc. To confirm adhesion, test TracSafe on a small inconspicuous area before proceeding to coat the entire surface.

How often do I need to recoat surfaces with TracSafe®?

While TracSafe is a durable all-season coating, it can wear over time, especially in higher traffic areas. Re-coat when and where needed for a fresh decorative sheen — and to renew slip-resistant performance.

Can I apply more than two coats for higher traffic areas?

For general use, two coats of TracSafe are required to create a durable slip-resistant surface. However, for even greater durability and longer performance, additional coats can be applied if desired.

Can you GUARANTEE that slip and fall accidents will never happen if I use TracSafe®?

While TracSafe earns top marks for slip resistance in lab testing — and many five star reviews from happy customers, TracSafe is offered as a very functional slip-resistance “aid” and not an absolute guarantee. AS SUCH, NO GUARANTEE AGAINST SLIP AND FALL ACCIDENTS IS OFFERED, EXPRESSED, OR IMPLIED.

4 reviews for TracSafe Anti-Slip Sealer

  1. Den_top_cool

    Toujours utiliser un rouleau en mousse pour l’application. C’est merveilleux, le sol devient comme du papier sablé. Même sur de la céramique.

  2. Val

    Can I paint it?

    • daichcoatings

      For specific assistance and advice on product use, just contact us at [email protected] or call us at 1-866-463-2424

  3. Justin Hodge

    Can this be used in metal roofing for added grip?

    • daichcoatings

      Thanks for your interest in Daich products!

      For specific assistance and advice on product use, just contact us at [email protected] or call us at 1-866-463-2424

  4. Brian Conaway (personal)

    Used this product on our concrete shower floor and it is awesome! Just need to stir it often to make sure the sand is dispersed in the coating before using a roller to apply!

Add a review

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Order by Phone

Order by Phone