Products

NanoClear304 is a synthetic additive containing nanoparticles for oils and lubricants of different grades and viscosities, including mineral, semi-synthetic and synthetic oils. NanoClear304 reduces friction & wear, improves performance and improves the host oil in shear & oxidation stability.

NanoClear504 is a synthetic additive for higher viscosity lubricants and increases the anti-wear and anti-friction properties, as well as improve shear and oxidation stability. NanoClear504 is engineered with true nano carbon particles, which allows for higher load carrying capacity, higher adsorbability and an increased film strength for better wear resistance.

NanoRestore736 is an oil treatment engineered to remove stiction, the sludge, and varnish created from burnt oil, while also lubricating. This oil and diesel stiction remover is proven to reduce the wear taking place inside your engine by up to 62% more than engine oil alone, verified by ASTM G-133 third-party testing. NanoRestore736 can reduce wear up to 62% more than engine oil alone by removing stiction and using a nano lubricant.

EsterAd 232 is an innovative oil additive used to improve host oil’s stability, performance, and anti-wear properties. It is engineered with three proprietary synthetic chemicals, including a Group V Ester, that can be added to a variety of oils of different groups and viscosities. It is a negatively charged additive, allowing it to attach to the surface of oilwetted components inside oil systems to reduce friction, improve oil film strength and boundary lubrication, and reduce operating temperatures.

NanoClear 2204 is a nano-particle enhanced 20 Weight oil additive formulated for a wide range of commercial and industrial applications. This oil additive package is an ashless formulation using
Group IV and Group V base oils, as well as nano carbon technology. NanoClear 2204 reduces wear or coefficient of friction depending on the application.

NanoClear 2304 is a nano-particle enhanced 30 Weight oil additive formulated for a wide range of commercial and industrial applications. NanoClear 2304 is an ashless formulation using Group IV
and Group V base oils, as well as nano carbon technology. NanoClear 2304 reduces wear or coefficient of friction depending on the application.

NanoClear 2504 is a nano-particle enhanced 50 Weight oil additive formulated for a wide range of commercial and industrial applications. NanoClear 2504 is an ashless formulation using Group IV
and Group V oils, as well as nano carbon technology. NanoClear 2504 reduces wear or coefficient of friction depending on the application.

NanoGold Brightstock 150 is a nano-particle enhanced universal base oil designed to provide increased performance over standard Group II base oils. NanoGold Brightstock 150 is formulated
for industrial applications to improve wear.

NanoGold P300 Paraffinc Base Oil is enhanced with nano carbons to provide increased wear resistance over standard low viscosity Group II base oils. NanoGold P300 Paraffinic Base Oil
is formulated for a wide range of applications, both commercial and industrial.

Ashless TBN Booster 150 is a new oil additive formulated to increase base number without increasing sulfated ash. Ashless TBN Booster 150 is designed to neutralize acids and extend
drain intervals without affecting ash content for both motor vehicle and industrial applications.

TotalArmor607 is formulated for today’s modern diesel fuels and typical biodiesel blends. It is completely ashless and sulfur content does not exceed 15 ppm. This diesel fuel additive complies with the federal low sulfur content requirements for use in diesel motor vehicles and non-road engines.